In the early 1950s, a study of the length of the toilet seat showed that users preferred about 16 inches of seat length for comfort. However, the trend eventually fell out of favor and was replaced with the standard 11.5″ seat length in recent years (see below).
Which is better 1 or 2 piece toilet?
I’m not sure which is better a 1 or 2 piece toilet. People who prefer 1 piece toilets generally prefer the water flushing function. 2- piece toilets are generally more comfortable and have better water flow than 1-piece toilets. So I would say that a toilet with both water flushing and a manual seat option is best.
What is the best toilet seat?
The best toilet seat is the one that fits your needs the best, considering the style of toilet bowl, how long the seat is and where it’s being placed.
What is the height of a comfort height toilet?
If you don’t install a toilet seat in a raised position, the toilet seat has to drop down to the water level of the tank. This can be at times as low as 4.75 feet and may have been a challenge for you to read this far. But your toilet seat does have a safety zone on it in case the water level drops to within inches of that.
Additionally, which is better round or elongated toilet seat?
Round: These look and feel more luxurious and are often used with bathrooms that are not in demand such as guest rooms in high-end hotels. Meanwhile, elongated toilet seats: These seats have a straight shape and are often used with modern, elegant bathrooms.
Are Square toilets comfortable?
Square toilets are certainly the least comfortable type of toilets. As the name suggests, they are shaped as rectangles with their front and back walls at the same level. They don’t sit flush or sit high. They are often used in guest rooms or other small bathrooms.
What is the most powerful residential toilet?
The world’s biggest toilet water tank uses more than one gallon of fresh water in a day, this is the world’s largest toilet. The water tank for San Francisco’s new giant toilet is bigger than the entire home of the tallest building in the world.
When should a toilet be replaced?
Usually, you want to replace an old toilet when it becomes unusable (and usually too expensive to repair). To judge whether to replace your toilet, look at the number on the bottom of your toilet. The numbers usually indicate when the toilet was installed – usually around 1950.
What is the size of an elongated toilet?
Size: 32 inches Wide x 48 inches Long x 31.5 inches H (81 cm x 96 cm x 81 cm)
Will a elongated toilet seat on round toilet?
An elongated toilet seat is designed to be used with a small toilet and should not be used on a square toilet. If a small toilet seat is used on a tall toilet, it is very likely that the person will slip. An elongated seat is also a good choice if you are concerned about privacy.
Do toilet seats fit all toilets?
One of the biggest challenges when you choose a toilet comes choosing the toilet that is meant to fit your toilet. As some people have said, toilet seats come in more than one size. So how do you know which one fits best?
Also question is, what is the difference between round and elongated toilet seats?
As explained in the article, the toilet seat is a round unit, meaning that if water is present in the toilet bowl, the seat will fill up, but if there is no water in the bowl, the plastic seat will remain flat. On the other hand, elongated bathroom seats stay in place and do not have a water-filled cushion.
How do you measure toilet rough in?
Measure the area to be renovated in square feet. Calculate the area by multiplying the length x width. Divide the result by 75 (100 square meters = 75 square feet).
How do I pick the right toilet?
The main thing to look for in a toilet is how you are filling it. You want it to flush and be able to remove clogs before you have to reach into the tank to manually. You can’t just judge on aesthetics. As far as height goes, look for one with an 11-15 inch clearance on the floor, a minimum of 11 inches above the floor and a minimum of 6 inches between the back of the toilet and the wall.
Are Toto toilets better than Kohler?
Both brands are good, but Kohler is probably the more expensive one. Toto toilets are more compact and easier to use than Kohler’s. Toto toilets are also more affordable. Toto toilets are easier to maintain and more expensive than Kohler’s. The Kohler toilets are cheaper because they can’t compete with Kohler prices.
Can I replace a round toilet with an elongated toilet?
Yes, this is certainly possible as long as you find a toilet that will match a toilet bowl with a diameter that is shorter than the toilet bowl on the other side of the room You can replace it with a toilet bowl from the other side of the room as your toilet may already be in use.
Likewise, why would I want an elongated toilet bowl?
It’s not because it looks “cooler” or more “modern”. The toilet bowls have a different shape so the user can sit in different comfort positions than those of ordinary toilets.
How do you replace a Kohler toilet seat?
Climb on top of the toilet and lift the seat off. Be careful not to accidentally drop your tools and smash the toilet, but be careful while your hands are still wet. Be gentle when replacing the seat. If your old seat is smooth, take a flathead screwdriver and gently tap the underside to loosen it first.
What is the best height for a toilet?
When deciding on the proper height for a toilet seat, choose a height that you are comfortable sitting on at when fully upright. Most adults prefer to adjust the height of their toilet seats between 36″ and 42″ from the floor. This gives you a bit more height if you have long legs or you find yourself seated on a low stool.
What is the best flushing toilet?
For many people, a toilet is an incredibly important device. If you’re looking for a high performance toilet that’s also easy to keep clean, the Neorest is your best bet (no flushing required).
What size toilet seat do I need?
How many square inches do you need? The typical adult square for a toilet seat is 17″-18″ square or 20″ x 20″. Make sure your toilet seat is placed directly below the center of the flange or the toilet won’t have a stable foundation.
What is the difference between S & P trap toilets?
The difference between an S&P and P trap toilet is that the S&P is a gravity-fed urinal with an opening in the top of the cistern, while the P&P is a siphon mechanism with no exposed water lines under the bowl.