Does Home Depot carry Hunter fans?
Hunter® P25X1 Home Heated P25X1 High/Low Cooling Fan. Hunter P25X1 features 25 dB of quiet operation, with a 2.5HP speed. The Hunter fan is a great choice for anyone who needs a fan that is quiet at medium speed and very efficient.
Can you put a ceiling fan on an 8 foot ceiling?
When looking for ceiling fan height, remember that fans in the same size category are always rated at 8ft in the horizontal span. This means that 8ft, 8ft, and 8.5ft height fans can all be installed on an 8ft ceiling and 8ft, 8ft and 8.5ft
Also, what are the best brands of ceiling fans?
If you are using one of the above fan brands, there is no reason to go cheaper. If you have a budget of $500 or more, it’s okay to consider replacing your ceiling fan if it doesn’t perform up to snuff.
Where are Hunter ceiling fans made?
Hunter ceiling fans are made in China and made by Boc-Tech in Massachusetts.
Do you need an electrician to install a ceiling fan?
If the fan is a low voltage electric fan, an electrician should not install it. Some appliances are low voltage and can be installed by anyone who knows how. However, some home appliances such as fluorescent ballasts and ceiling fans need to be installed by licensed electrical fitters.
How much does it cost to install a ceiling fan with existing wiring?
Estimated costs of ceiling fans based on existing wiring for 4 ceiling fans or less
How long does it take to install ceiling fan?
Each fan has its own assembly time. Most fans don’t need any special tools, although installing a fan is often a very easy process. All you need is a Phillips screwdriver and a wrench. Depending on the fan, this can take from 10 to 30 minutes to complete the job.
How hard is it to install ceiling fan?
It takes about an hour to install a ceiling fan. Because the light is attached to the fan, it takes about one and a half hours to install the lights and one and a half to install the fan.
Is a 3 blade or 4 blade ceiling fan better?
The 4 blade fans seem to be a little bit better in quality but they are very noisy. The 3 blade fans are quite a bit cheaper and more quiet.
How much should it cost to have a toilet installed?
It won’t cost as much as it would cost to replace plumbing lines (which can cost $10,000+) or to install a toilet and water lines, which can cost $4,000 or more (not including any plumbing).
How much does it cost to install a ceiling fan without existing wiring?
An electrical inspection and permit is not required to install a ceiling fan on a single- or three-wire circuit, except to the panel. However, installation of ceiling fan motors requires a permit from the City if the new circuit exceeds 150 amps and is not connected in a main panel.
People also ask, are ceiling fan Downrods universal?
The answer is yes. They will work in your ceiling fan.
How do I choose a downrod length?
Your total rod length is the combined length of all of the down rails (the actual length and the length between) plus one third the distance between rails. As I described earlier, the rail width is based on the width of the down rails.
What is the difference between 3 blade and 5 blade ceiling fans?
What is the difference between a 3 blade and 5 blades fans??The 5 blade is a type of ceiling fan with more blades than a 3 bladed one. The difference is that a 3 blade fan uses 3 blades but it has two blades on the ceiling fan.
How much does it cost to install a light switch?
A common cost for installing a light switch is between $10 and $40, depending on the project. However, if you want to install a light switch on a ceiling, the price can go up to $45 or $60. Installing it on a wall or using switch plates can cost as little as $5 and as much as $25.
How high does a ceiling need to be for a fan?
There are many factors affecting ceiling height, including the square footage of the room where the fan is located, the thickness of the ceiling, and the width and length of the opening in the ceiling. Most ceiling fans can be installed from 30″ to 36″ below the ceiling.
How long of a ceiling fan downrod do I need?
Lengths. The recommended ceiling length for a direct drive fan is 14 feet. However, this can vary depending on the type of fan you buy. A two-speed, three-speed, or four-speed fan has a downrod length of 13 to 18 feet.
Do ceiling fans come with Downrods?
Standard ceiling fans with fan kits come with a downrod assembly, usually on the mounting bracket. The fan comes pre-assembled with the motor, fan blades, and accessories. The fan then has the motor, fan blade, and light assembly attached to the pre-assembled mounting bracket.
Can all ceiling fans use a downrod?
Downrods can be a challenge. They are not installed by most manufacturers. This is because a 2×4 must be cut to length and the cut must start at the bottom of the fan unit, while the hole for the downrod must be at least 5/16″ from its own base.
How big of a ceiling fan should I get?
How much does Home Depot charge for ceiling fan installation?
It was Home Depot who called me and suggested that I purchase a box cover for my ceiling fan – the actual price was only $20.00!